Wholesale Discount Color swatches of A09 series Export to Lisbon

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Marble Tile Bathroom Floor , PVC Artificial Marble Flooring , Decoration Line , In addition, we would properly guide the customers about the application techniques to adopt our products and the way to select appropriate materials.
Wholesale Discount Color swatches of A09 series Export to Lisbon Detail:

A09系列-1


Product detail pictures:

Wholesale Discount
 Color swatches of A09 series Export to Lisbon detail pictures


We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Wholesale Discount Color swatches of A09 series Export to Lisbon, The product will supply to all over the world, such as: Estonia , Tajikistan , United Arab Emirates , High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. We also offer agency service---that act as the agent in china for our customers. If you are interested in any of our products or have an OEM order to fulfill, please feel free to contact us now. Working with us will save you money and time.


  • BOB SCHMIDT SHOWS YOU HOW TO INSTALL AN INTERIOR DOOR USING A NEW PRODUCT WHICH SIMPLIFIES THE PROCESS FOR THE HOMEOWNER AND NOVICE REMODELER WITH YOUR HOME REMODEL PROJECT. The name of this product has been changed to (The Quick Door Hanger) and may be available at home depot soonI told myself when I started making these videos that I was’nt going to make a video on how to hang a door there’s a lot involved in it and it takes experience to learn how to do it properly but I found a new product and I think
    it’ll give you a fighting chance The product that we are going to use to hang this door today is a relatively new product it’s called Quick Plumb for Door
    Hanger it’s made by Express Products I’m not sure where they’re from but apparently they have a website and I
    believe they did have a video there and I have actually already watched it this is what they provide you in their package supposedly this is enough for doing two doors although I recommend you go to
    their site and take a look at the way they recommend doing it first uh… I want to do it a little bit
    different than their directions to try to help simplify the process for the
    homeowners and do-it-yourselfers I ran across this product at my wholesaler they were giving them away for free they want
    carpenters to start trying to use them and see what they think of them I did hang a couple of doors with them and I
    did like the results but there was still some tweaking and
    judgment calls that had to be made uh… I kind of went off of what they said and I added to
    it and changed the way you use them a little bit where I think it’ll give you more of a
    fighting chance as a novice or a home remodeler to be able to to do this. As per
    their instructions they recommend that you come to about the center of the
    hinge you line this little clip up with the
    front edge the lead edge of the door and then with the screws provided put the three screws in making sure that
    this is kept tightly against the front of the
    door as you’re doing it. Repeat the process with the middle and the bottom
    hinge As per their instructions repeat the
    process approximately opposite the hinge side that you’ve already put on according to their recommendations it’s
    time to hang the door but I’ve got a little bit of a different
    way I’d like to see you try it directly opposite the clips you just installed on
    the hinge side of the door go ahead and install the remaining six clips on the opposite side of the door after you’ve installed it opposite the
    one on the hinge side go ahead and take a pair pliers and bend this flange out straight like
    this repeat with the other five on this side
    of the door on the hinge side of your door this tab is still going to be bent just the way it was sent at the factory directly opposite enough in all six
    locations you’re going to have a another one where
    you had bent this flange straight-out according to their instructions measure approximately one-half inch in
    from your rough opening and put a mark do the same thing on the other three sides coming off of your mark making sure that this
    is dead level very important go a head and start making a line and make your line go all the way up and
    down the side of the door now that you have the plumb lines on all four sides of the
    door both sides it’s time to take the door
    and put it in place take a level and put it on the top of your door as you see this isn’t level what we’re going to have to do is we’re going to
    have to stick a shim underneath the bottom side of that door to make up for this difference here
    where it’s too low on the hinge side tap the shim underneath the door until the
    header says level if this gets carpet you could probably
    just cut this shim off and leave it out underneath here and the carpet will fill
    the void if this is tile or hardwood what you’ll
    have to do is cut the bottom of the jam off on the opposite side remove this
    shim and let it come down tight to the floor now that you’re headers level it’s time
    to start anchoring the door starting at the top hinge with about the same space on this side
    as the other side go ahead and run in your first screw with the top hinge screwed see these three little notches here find the little notch and the spot corresponding to
    it that is closest to it and put a mark now coming down to the one below it making sure that your marking in the
    same place on the little mark mark it here coming down below it again making sure you mark the same spot
    as it was up above which is here then what you need to do is line these
    marks up with that plumb line and put screws in these two holes Now starting on the opposite side of the
    door same side as the hinge



    Manufacturing Equipment

    The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Kimberley from Turin - 2016.09.16 13:44
    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Sara from Grenada - 2016.11.01 17:04

    Related Products

    WhatsApp Online Chat !