Leading Manufacturer for Color swathes for A01 series to Frankfurt Importers

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for XPS Plastic Foam Board , PVC Marble Sheet , Foam Board R Value , We warmly welcome friends from all walks of life to cooperate with us.
Leading Manufacturer for Color swathes for A01 series to Frankfurt Importers Detail:

A01系列


Product detail pictures:

Leading Manufacturer for
 Color swathes  for A01 series to Frankfurt Importers detail pictures


Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for Leading Manufacturer for Color swathes for A01 series to Frankfurt Importers, The product will supply to all over the world, such as: Sheffield , Swedish , Los Angeles , By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.


  • Please, click the red SUBSCRIBE button, or here… https://www.youtube.com/channel/UCcKZNXXXK5jTCBY1J2tSlMA?sub_confirmation=1 and be the first to get relevant info that WILL $ave you money!!! See why sealing your ducts is EXTREMELY IMPORTANT! Unfortunately, and erroneously, most homeowners that buy a new cooling/heating system completely overlook their ducts. Even a tight system can leak about 10%, causing a 20 SEER system to operate as an 18 SEER. And that’s not even mentioning some older duct systems that leak over 20%!



    How to grout http://www.youtube.com/watch?v=6vsho0NXyvk
    Part 1 Prepping walls, three piece drain explained https://i1.ytimg.com/vi/F8Gw6XFy3NI/mqdefault.jpg
    Part 2 Installing the pre slope https://www.youtube.com/watch?v=QNsboWBwT1E
    Part 3 Installing the Pan Liner https://www.youtube.com/watch?v=RBIff-SkOCk
    Part 4 Installing the Backer Board https://www.youtube.com/watch?v=Xue7liOgZoU
    Part 5 Waterproofing and Mud https://www.youtube.com/watch?v=2A9NVIRwr8k
    Part 6 Corner seat and shower floor https://www.youtube.com/watch?v=kFftfgWqZJ0
    Part 7 Installing the tile https://www.youtube.com/watch?v=1q7bIacGNhM
    Part 8 Cutting in and Making a Recessed Niche https://www.youtube.com/watch?v=hTGB5Nn7LRE
    Part 9 installing the bathroom floor https://www.youtube.com/watch?v=-zLXk-rPd7w

    Complete bathroom shower install time lapse start to finish. Including pre slope, vinyl shower liner, cement board, recesses niche, waterproofing, porcelain tile floor, and grouting. A pre pitch or pre slope under a shower pan liner is an essential part of a successful tile shower installation. A pre slope is the base under the shower pan liner which is pitched so that the any water that manages to get into the shower base can be directed to the weep holes in the three piece drain and out of the liner. If a pre slope is not installed under the liner then any water that filters into the base of the shower will remain there. To install a pre slope first a sheet of tar paper is placed on the subfloor followed by a metal lath to reinforce the mud, especially at its thinnest point at the drain. The deck mud is then shaped so that there is a slope of ¼” per foot sloping towards the drain. The part of the base furthest away from the drain will be higher than the drain, so as to create a positive pitch towards the drain. How to install a vinyl shower liner. When installing a vinyl liner for the pan of a shower floor, it is imperative that any penetrations to secure the liner be above the level of the shower curb. Also the folds at the corners of the shower should always be done without cutting the liner lower than the shower curb. I do not install dam corners on the curb, because I apply a liquid waterproofing membrane on the surface of the entire shower stall, or at the very least the curb will be thoroughly waterproofed to avoid leeks in this critical area if this step is to be omitted, the dam corners should be used. The silicone bead at the drain where the liner is clamped to the 3 piece drain should always be applied, do not skip this step. How to install mud in a shower pan for a tile shower stall. When installing a tile shower, whether it be ceramic, marble travertine or any other tile product, a mud base will be required. Mud also known as deck mud, is a mixture of sand and Portland cement mixed to a ratio that will create a solid foundation for the tile which will be installed on it. The deck mud is mixed with water to a dump consistence which will allow the deck mud to hold its shape when pressed into a ball. The mud must be pitcher towards the drain so that a slope of at least ¼” per foot is achieved. The ratio of sand and Portland cement is usually 4:1 or 5:1. I usually use “Quikrete” sand topping mix, which as far as I know, has a ratio which is a little richer than needed, but is suitable for a shower pan. The method I employ to install my mud in shower pan, is to create a level and flat perimeter around the base of the shower walls which is at the correct height in relation to the drain, and then fill the middle part of the shower pan screeding down to the drain with the proper pitch. The mud is shaped with a wooden trowel, steel trowel, level and other pieces of straight wood lengths cut to the required lengths. In this video I demonstrate the technique I use to install a shower mud pan base. There are other methods that can be used, but this is the way I have installed hundreds of shower bases. How to cut and install cement backer board for ceramic wall tile. When installing a cement backer board it is important to use the correct kind of screw. Drywall screws are not to be used to install the cement board, due to the composition of the backer board an uncoated screw will deteriorate over time and compromise the integrity of the tile installation. A screw that has been coated or galvanized must be used. A screw should be placed every 8″, there is going to be a lot of weight when the tile is installed so an adequate number of fasteners should be used. To cut the board to the correct size a simple utility knife is all that is needed. Score the board with the blade of the knife a few times, and then bend the board back until it snaps, complete the cut by running the knife along the cut from the opposite side. A simple key hole saw can be used to make holes for shower valves and escutcheons.

    The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Linda from Indonesia - 2015.06.21 17:11
    The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Carlos from Estonia - 2016.03.07 13:42

    Related Products

    WhatsApp Online Chat !